The GO-BIO is a 4 channel high security biometric transmitter that is activated by passing a finger or thumb over the reading sensor, the sensor reads the fingerprint and compares it to those stored in its memory, if a match is found the transmitter is activated.
Up to 10 finger-prints can be programmed in the transmitters memory and a channel from 1 to 4 assigned to each fingerprint.
biometric transmitter
There are two modes of operation
1. Pass your finger over the sensor and the transmitter transmits on the channel assigned to that fingerprint
2. Press one of the 4 channel buttons and then pass your finger over the sensor and the transmitter will transmit on the channel selected
The GO-BIO will operate with any of the 868 MHz receivers, access control units and roller shutter control units
Supplied with wall / car dashboard holder
* Frequency: 868.35 MHz
* 4 channels
* Coding method: High security rolling code
* 10 fingerprint memory
* Sliding sensor protection cover
* 3 led status indicators
* Range: Up to 100 metres
* Power: 1.5V battery type AAA
* Dimensions: 76 x 41 x 15 mm
Biometric Radio Remote Control Transmitter
More details can be found at www.quantek.co.uk/
Photo:
http://www.prlog.org/




