Snowboarding Zone has just released a new section of their website that has all of the basics on Tuning A Snowboard. This is part of a new community website that is all about Tuning A Snowboard. Members and non-members can visit this Tuning A Snowboard page on the Snowboarding Zone website for free at: http://snowboardingzone.org/
Here is an excerpt from the new Tuning A Snowboard information webpage:
"To properly tune your snowboard there are several things that you will need to do. To begin with you will want to set up a couple of sawhorses in an area that has plenty of ventilation and room to work. Then you will want to remove the bindings; however, this is actually not necessary but it will be easier for you to work on the board if they are out of your way. Next, you will want to take some window cleaner and paper towels to wipe down and clean your snowboard to the best of your ability with using only that product.
Now comes the real stuff. You will want to use some base cleaner and some rags to give your snowboard an even more thorough cleaning than before. This step right here is why you want a very well ventilated area because the fumes from the base cleaner are very strong and not to mention, they are highly flammable. So do not do this around any type of open flame.
Keep on using the base cleaner until you can determine that it is no longer removing any type of wax or ground in dirt. Then, with the base up, use a knife to dig out any type of small rocks or stones that may have been embedded into the board."
There is plenty of more information on the new general information Snowboarding website that can be found by visiting: http://snowboardingzone.org/
About Snowboarding Zone: Snowboarding Zone is a Community Site that brings users into a deeper relationship with Snowboarding and Snowboarders from all over the world, and other snowboarding community members.
