One of the great advantages of using a laptop computer is its ability to operate it in a portable manner. This is achieved by the use of a battery as its power source. However, most users take the battery for granted and are unaware that it will eventually fail.
Most laptops today are powered by Lithium-ion (Li-ion) batteries. These are a great alternative to the older technologies since they have a much higher power to weight ratio, are not prone to the memory effect phenomenon and are inherently more environmentally friendly. However, much like the older battery chemistries, they do have a limited lifetime. Although the older chemistries rates of failure were proportional to the number of charging cycles, the capacity of today’s Lithium-ion batteries diminish with age.
Generic Dell Inspiron E1705 Battery(http://www.everbatt.com/
When you find that your dell laptop computer does not hold its charge as long as it used to, or when your system’s power management utility software indicates that its charge level is decreasing, you will need to find a replacement dell laptop battery to maintain your computer's operating time. Finding the correct Dell Inspiron E1705 Battery is generally a matter of searching for a battery that will fit your computer's make and model number. In addition, the specifications for the battery are usually found imprinted on the charger. And the power indicator would flash and create a weird “buzzing” sound while the computer's plugged into outlet power. Also, it seemed as if the power wasn't connected at all sometime.
Then please follow the below steps to calibrate the Dell Inspiron E1705 Battery and to make sure whether you should buy a new one.
Firstly: Charging the Battery Pack
Fully charge the battery pack when the notebook is in use. To
charge the battery pack:
1. Insert the battery pack into the notebook.
2. Connect the notebook to external power through an AC adapter. (The battery light turns on)
The battery light turns off when the battery pack is fully charged.
Discharging the Battery Pack
Disabling Hibernation
To fully discharge the battery pack, disable Hibernation temporarily.
To disable Hibernation:
* Select the Power Meter icon on the taskbar or access Power Options > Hibernate, and clear the Enable Hibernate support check box.
Secondly: Discharging the Battery Pack
After the battery light turns off, which indicates that the battery
pack is fully charged, begin discharging the battery pack.
Thirdly: Recharging the Battery Pack
1. Connect the notebook to external power and keep the notebook connected until the battery pack is fully recharged and the battery light turns off. You can use the notebook while the battery pack is recharging, but the battery pack will charge faster if the notebook is turned off.
2. Select the Power Meter icon on the taskbar or select Start Control Panel Performance and Maintenance > Power Options Power Schemes.
3. Reenter the 3 settings you wrote down for the 3 options in the Plugged In column and for the 3 options in the Running on Batteries column.
4. Select the OK button.
Photo:
http://www.prlog.org/




