Our main mud equipments including Shale Shaker,mud cleaner,hydrocyclone separators.
We cite a normal inquiry for a drilling mud system and equipments below.
We have had a look at your quotation and have the following questions as we are unfamiliar with your drilling mud equipment.
(http://www.gnsolidscontrol.com)
1. Based on the quotation what is the maximum mud specifications that the unit will be able to handle?
a. Mud weight in SG
b. Solids content as % by Volume
c. Viscosity expressed as marsh funnel seconds
2. Based on the above will the unit as specified be able to maintain mud properties at less than 0.5% sand content?
3. Are you able to supply a basic schematic of the layout indicating sizes and pipe placement?
4. Will the electrical wiring and generator meet Australian standards?
5. Do you have an estimated weight for the quoted system?
6. What standard of finish has been quoted, we are looking for a top quality product – this is the reason that we were looking at assembling and
partial manufacture ourselves.
7. What is the lead time from placement of order and deposit?
8. Do you have anything currently under manufacture that you could send photos of?
9. Do you have any “Standard”
I appreciate your efforts and look forward to your response.
Have a great day!
Regarding to your last mail please find following solutions:
About our Mud Cleaner (http://www.gnsolidscontrol.com/
1. The maximum mud specifications,mud system will be able to handle is 120 cubic meters per hour?：
a. Mud weight:1.4g/?
b. Solids content by Volume:20-30%
c. Viscosity:45s-
2. Based on the above the unit as specified will be able to maintain mud properties less
than 0.5% sand content
3. The electrical wiring and generator standards
a. Electric controlling system: Voltage,380V/
b. Defend grade: IP54/65
c. Generator:Brand "Wilsom" of England meets EURO3 Standard (Does this satisfy Australia standards?)
Regarding to above parts, please take it easy,we have exported goods to many countries, the high performance and durable quality have got appreciation from
customers.
4. The standard of finish has been quoted:
We quoted you on top quality goods, our company got ISO9001:2000 certificate, furthermore the
products get third-party inspection certificate.
5. The leadtime: 30 Days after receiving deposit
6. Photos of products under manufacture:
7. Do we have any “Standard”
According to your requirements on capacity, we need to re-design the whole system
since the equipments need to be matched again, in order to put it in 40' container the
dimension can be designed by us as 12000x2300x2300mm
Company blog about shale shakers,desanders,hydrocyclone separators here:
http://oilfield.gnsolidscontrol.com
8. Regarding to the basic schematic of the layout and the approximate weight, we
need time to re-design the whole drilling mud system so we will send you ASAP.
9. Enclosed please find new quotation on new system for all equipments needed including Shale Shaker,mud cleaner,hydrocyclone separators.
Hope above will be helpful to you, even though, any other questions please contact us freely.
