Tannoy Mercury F4 Custom

Tannoy Mercury F4 Custom. Recommended Amplifier Output: 10 – 140 Watt RMS. 100 Watts Continous Power / 200 Watts Peak. 8 Ohm Nominal Impedence. The Mercury F Custom series loudspeakers utilise materials and components carefully selected
By: Golfman Story
 
Aug. 17, 2009 - PRLog -- Dense wood material used for the cabinet construction, including a substantial MDF front baffle, provides the essential cabinet rigidity required of a good loudspeaker design. The bass and treble units are solidly built providing exceptional acoustic performance and long-term reliability. The crossover components have been upgraded, including a high quality polypropylene capacitor used in the tweeter feed, and the circuit topology revised to deliver greater high frequency detail, better imaging and more control at the bottom end. Tannoy DMT? (Differential Material Technology) – the interface between drive unit and the cabinet structure is crucial and this area is given special attention in the F1 and F4 Custom models. Bracing materials of different acoustic properties are used to dampen the driver to the internal bracing and then to the enclosure body itself; resulting in an exceptionally well damped structure that minimises the effect of unwanted resonances. Wiring ? the internal wiring has been replaced with high purity Van den Hul silver plated cable for lower energy loss and greater transparency. Termination panel ? the termination panel has been upgraded with high quality gold plated brass terminals to optimise the signal transfer with minimum information loss.The bass performance is rich and powerful while the mid and high frequency presentation is accurate, clear and dynamic. This natural sounding acoustic balance allows Mercury to reveal all the scale and impact of original soundtracks, this as well as delivering the subtle nuances of complex audio recordings. One listen and you’ll know precisely what we’re talking about. Dimensions: 970 x 204 x 290mm – 13.5kg.

Technical Details

* Tannoy Mercury F4 Custom Floor Standing Speaker
* Van Den Hul internal wiring
* Substantial Cabinet & Baffle construction
* Recommended Amplifier output 10 – 140w RMS
* 10 Metres of QED Micro Speaker Cable included

Customer Reviews (Tannoy Mercury F4 Custom)

1) By Zep-man (Blackpool)

“Bought these instead of the rated Clarity 8’s as I did’t actually like them on test.

These were a similar price with good reviews (and are the Custom versions) and supposedly worked ok even near to the wall, which I’m a bit stuck with – and glad I went for them.

Sound good even before ran in, so should be better in a while (can’t be bothered with reversing them under a duvet!). Came with spikes and wood floor protectors too – nice touch.

I got them for half this tho.”

————————————-

2) ByMr. T. A. Gordon “Da Simi” (U.K)

“I’ve just bought a pair & i’ve got 2 say there dam good 4 the price especially when u bi-wire them because this is when u really get 2 appreciate how much more emphasis is heard especially in instrumental tracks where u also clearly hear the difference.There is so much detail in the sound.Bloody well done ,Tannoy”

Tannoy Mercury F4 Custom

http://who-discovered-mercury.the-review.info/2009/08/17/...
End



Like PRLog?
9K2K1K
Click to Share