The PacketLight product suite offers a variety of WAN connectivity solutions:

PRLog (Press Release) - Jul 15, 2008 -
PacketLight Networks:Product Overview

The PacketLight product suite offers a variety of WAN connectivity solutions:
"Good things come in small packages"
      

PL-1000  10G DWDM Transport Device      PL-200  Storage Extension over IP
       
PL-400  CWDM/DWDM Transport Device   PL-100  Multiple Storage Extension over
SONET/SDH
 PL-300  Passive Transport Device      PL-10 & PL-20  Storage Extension over
SONET/SDH
PL-1000

"The most complete 1U, 4 channels (up to 120Km) 10G DWDM solution"
The PL-1000 is highly suitable for applications such as:
   High throughput metro ethernet connectivity
   Efficient central office and local exchange connectivity
   Interconnection of LAN, TDM and SAN over remote sites
   Effective infrastructure for triple play, NGN and DSLAM backhaul
   Enable upgrade of CWDM or DWDM networks to support 10G services
Features:
   Up to 4 10G Services (or 2 Protected Services)
   Flexible interfaces support
   10G Eth WAN/LAN, STM64/OC192, OTU-2, 10G FC
   Two embedded OSC for management
   Protocol level performance monitoring for STM64/OC192 and 10G Eth WAN/LAN
   Integrated Mux/Demux, Optical Amplifier (EDFA)
   Supports multi-service solution together with PL-400 and PL-300
   External alarms
   Ring, point to point and regeneration topologies
   1+1 facility protection
   Web GUI and SNMP management
USP's:
   Highly integrated end to end 10G solution
   Compact size, simple installation, operation and maintenance
   Scalable ‘Pay as you Grow’ architecture:
   scalable XFP based solution
   stack chassis to a max of 32 10G Channels

Application Diagram:
PL-400
“The most advanced 1U 8-Channel DWDM or CWDM solution”

The PL-400 is highly suitable for applications such as:
   Network simplification and cost reduction
   Improved utilization of infrastructure by multiplexing several services on the same fiber.
   C/DWDM extension between central office and local exchange
   Fiber relief for high-capacity multi-tenant buildings and campuses
   Transport of SONET/SDH, Ethernet, Fibre Channel FC, OTN and video services.
   Interconnection of SAN and LAN islands over remote metro sites

Features:
   8, up to 4.25G, Services (or 4 Protected Services)
   Flexible interfaces support
   GbE, Fast Ethernet, 1/2/4G FC, OC3/STM1, OC12/STM4, OC48/STM16, OTU-1, ESCON, DVB-ASI, SMTP-SDI
   Built in EDFA, Mux/DeMux and management channels
   Built in Performance Monitoring (FC, GbE)
   Bidirectional 3R
   Supports ring, point to point and regeneration topologies
   Support 1+1 facility protection
   Two embedded OSC for management
   Easy to use web-based management tool
   Support for SNMP management
   Scalable Solution up to 32 Wavelengths
   Supports multi-service solution together with PL-1000 and PL-300

USP's:
   Highly integrated end to end C/DWDM solution
   Compact size with rich feature set
   Simple installation, operation and maintenance
   Unique Layer-2 Performance Monitoring (FC, GbE)
   Supports both ring, point to point and regeneration topologies
   Low power consumption

Application Diagram:

PL-300
"PacketLight's 1U Passive Optical Solution"
Features:
   Passive transparent any rate, any service multiplexing
   Compatible with all optical networking products (ITU grid)
   Supported configuration
   16/32 channel passive optical Mux/DeMux
   Extended reach with dispersion compensator module (DCM)
   Single wavelength add and drop (OADM) capability

Applications:
   Expansion of existing fiber capacity regardless of service type
   Building scalable high capacity pay as you grow optical networks
   Convergence of existing networks and new services over existing infrastructure
   Low cost fully passive optical layer solution, transparent to service rate and type
   Extending the fiber optical solution reach with dispersion compensators
   Building cost effective add and drop networks
   Support stacking with the PL-400 and PL-1000 products.
Application Diagram:
PL-200
"The most effective 1U storage solution for business continuity and disaster recovery over IP and metro Ethernet networks"
The PL-200 is highly suitable for applications such as:
   Interconnection of SAN islands over existing IP and Metro Ethernet networks.
   Synchronous backup, mirroring, and simultaneous data replication for multiple applications
   SAN connectivity extension over long distances
Features:
   One or two 1G/2G FC service ports over one or two Ethernet uplink ports
   Standard FCIP mapping
   FC rate limiting with 1Mb/s granularity
   Embedded hardware based security and compression
   TCP flow control enables covering thousands of kilometers
   Native performance monitoring of FC and Ethernet
   Standard key management IPSec based security
   Copper 100 Base-T or Optical 1000 Base-X uplink interfaces
   Support Web GUI and SNMP management interface
   Support local and remote management.
Special advantages:
Highly integrated SAN extension solution at affordable cost
Incorporates the latest technology standards (FCIP, IPSec, LZS)
Secure with hardware based IPSec data encryption
Reduce data transport OPEX with LZS compression
Easy to use web-based management tool
Simple installation, operation and maintenance