Hobart, Washington USA
Die Casting Information and all about Low Pressure Die Casting and DieCasting Machines at new section on Metal Casting website that is all about Die Casting The new Die Casting section can be accessed by users and non-users by visiting the following web address: http://www.metalcastingzone.com/
Here is an excerpt from the Die Casting section page on Metal Casting Zone:
“Die casting is the method used for forcing molten metal into mold cavities under high pressure. Die casting is very versatile and hence, is the widest used method for casting a metal. Die casting is same as permanent mold casting the only difference is that the metal is injected into the mould at very high pressure of 10-210 Mpa. This results in a more uniform part, usually good dimensional accuracy and also good surface finish.
The different metals and alloys that can be used in die casting are zinc, aluminum, copper, magnesium, tin and lead. Ferrous metals can also be used for die casting, die casting method is generally used for applications in which a large quantity is medium or small sized parts are required with detail, good dimension and fine surface finish.
There are namely two equipments used for die casting cold chamber and hot chamber process.”
The new Die Casting and Low Pressure Die Casting webpage is there to provide users with all of the information they need on Die Casting and learning the basics of DieCasting Machines. It can be visited for free at: http://www.metalcastingzone.com/
About Metal Casting Zone: Metal Casting Zone is a Community Site that brings users into a deeper relationship with Metal Casting.
