High Temperature 550F Hot Oil Unit

March 24, 2008 - PRLog -- Shini USA, the plastics division of Budzar Industries, Inc., introduces the High Temperature 550F Hot Oil Unit.

The Shini USA-STM-HT with a "SPECK" MAG-DRIVE "SEAL-LESS" pump has a maximum operating temperature of 550F using an Omron Controller and maintaining an accuracy of +/-2F.

The Shini USA High Temperature Hot OIl Unit with a Closed Loop Shell and Tube Cooling Method is available with a 12kw or 24kw configuration.

Other features include:
--Closed Loop System - the machine is equipped with a 12kw or 24 kw heater and cooling heat exchanger with an Automatic Solenoid Cooling Control Valve
--Omron PID, Dual Digital Readout Controller
--Seal-Less Mag-Drive Pump
--Y-Strainer
--Discharge Pressure Gauge
--Three Phase Motor Overload and Phase Protection
--Start/Stop Push Buttons
--Audible Alarm including Low Level, Over Temperature and Pump Overload
--Safety & Diagnostic Control Panel
--Heavy Duty Powder Coated Cabinet with Lift Off Side Panels
--1 Gallon Expansion Tank with Low Level Switch & Sight Glass
--Siemans Electrical Components
--Supply & Return Shut-Off Valves

Shini USA World Alliance combines 50 years of experience in the plastics auxiliary machinery market by combining the best in worldwide engineering, design and support insures plastic processors the best quality at a maximum value when buying our products.

Shini USA provides a full range of top quality products including:
---Low Speed Granulators
---Central Granulators
---Beside the Press Granulators
---Portable Air-Cooled Chillers
---Portable Water-Cooled Chillers
---Temperature Control Modules (Hot Water Units)
---Hot Oil Units

Since 1975, Budzar Industries Inc., has earned a reputation for quality and ingenuity in the design, engineering and manufacturing of temperature control systems.  Today, Budzar Industries Ind., can be found throughout the world bringing accurate temperature measurement and control to the production of: pharmaceuticals, chemicals, petroleum, plastics, rubber, paper, power, steel and food industries.

# # #

Shini USA World Alliance combines 50 years of experience in the plastics auxiliary machinery market.  

Our goal of combining the best in worldwide engineering, design and support insures plastic processors the best quality at a maximum value when buying our products.

Shini USA provides a full range of top quality products including:

Granulators-Low Speed, Central, Beside the Press
Portable Air and Water Cooled Chillers
Hot Oil Units
Temperature Control Modules (Hot Water Units)

Website: www.shiniusa.com