1. Overview
SwitchSniffer is a program that can scan your switched LAN for up hosts and can reroute and collect all packets without the target users' recognition. It can also detect the ‘arpspoofer’
1.1 Features:
-. It can pull and collect all the packets on the LAN.
-. It can scan and show the active hosts on the LAN within a very short time.
-. While spoofing ARP tables, it can act as another gateway (or ip-forwarder)
-. It can collect and forward packets by selecting inbound, outbound, and both to be sent to the Internet.
-. An ARP table is recovered automatically in a little time (about 30 seconds). But, this program can keep spoofing continuously with a periodic time.
-. Although one or more network interface cards are installed on a computer, this program can scan and spoof by selecting one of NICs.
-. It can get traffic information about the amount of data transferred to and from the internet including I session information.
-. It can detect which computer is running an arpspoofer program on the local network.
-. It can scan all hosts automatically on the network.
-. It has a feature which filters or blocks sessions, local hosts and remote hosts.
-. It can cure arp-cache poisoning.
1.2 Benefits:
-. It can find out the hidden hosts on local area network.
-. It can check out if abnormal hosts are connected on the wireless network.
-. It protect your network from abnormal users.
-. It can check out if there are abnormal packets on the local network.
-. It can view users/passwords, chat sessions and web sessions etc., on the switch network
by other application.
-. You can use the network without blocking of arp-spoofer.
